LED interior lighting for 3-axles compartment wagon.
Tasks of project
Circuit
Circuit diagram
Please click to enlarge the diagram.
Main unit
The main unit installed in 'attic' of toilet.
- Connector to pickup shoes.
- Lighting unit NR and R.
- c96 function decoder.
- Condensers C31, C32, C41 and C42.
- Current limit resistors R31, R41 and R401.
- Anti back current diodes D31 and D41.
- Normal brightness yellow LEDs D401 and D411 for toilet.
Lighting unit NR
Lighting unit NR placed in under roof of four compartments in Non-smoking(Nicht Raucher) area.
- Connector to main unit.
- LEDs D301, D311, D302 and D312(super bright yellow LED / hübner's spare parts #4036).
- Current limit resistors R301 and R302.
- A preparation connector for lighting of brakeman's cab.
- Directly connected to f2 output.
- I can't reach to conclusion there's a permanently fixed lighting in the cab or not.
Lighting unit R
Lighting unit R placed in under roof of two compartments in Smoking(Raucher) area.
- Connector to main unit.
- LEDs D303 and D313 (super bright yellow LED / hübner's spare parts #4036).
- Current limit resistor R303.
Installation
Drawing of parts layout
Please click to enlarge the drawing.
Main unit
- Main unit fixed to roof with two 15mm nylon hexagonal pillar.
Connector between Main unit and pickup shoe.
- Can be access both from roof and toilet door.
- This is an only electric connection between body and roof. So it is very easy to remove the roof.
Lighting unit NR and R.
- Fixed by pushing in to original screw base.
Units in it's place.
Coding switch.
Coding switch of c96 can be access from toilet door.
Pickup shoes
Original pickup shoes from märklin #5605 lighting kit (discontinued).
Completed wagon
Result
Important parts:
- Hyper brightness yellow LEDs : hübner #4036 LED hyperhell für Innenraum (10 pcs. / pack).
Copyright © 2001 by Jun Maeda / KOBE JAPAN