märklin #6095 c95 Standard Gauge 1 decoder

This is a result of my study for 6095 c95 Standard Gauge 1 decoder.

6095 c95 decoder is decoder for standard design single motor Marklin 1 locomotives.

Some variations are exist by difference of angle of 4-pin connecter. You can find out detailed spare parts number on marklin USA web page(http://www.marklin.com/tech/6-99.html).

The pin assign of two connectors on the decoder are:

4-pin connector(a-d on above fig.)

1. to motor
2. to motor
3. from rail
4. from rail

10-pin connector(1-10 on above fig.)

1. +Ub (about +20V)
2. F1
3. Lf (Light front)
4. gnd (internal ground)
5. F4
6. Lr (Light rear)
7. F3
8. F2
9. gnd (same as #4)
10. +Ub (same as #1)

Copyright © 2000 by Jun Maeda / KOBE JAPAN